D7-S25 (PM85)

D7-S25 (PM85) is a drilling/piling mast attachment for driving steel piles up to 220 mm, or drilled piles up to 323 mm

BENEFITS

S25 is SPD’s own carrier, specially developed as a carrier and drive source for SPD’s drill and pile masts
S25 is more efficient and better suited than any excavator on the market due to the following arguments
3 large Rexroth pumps, one pump only for rotary, one pump only for percussion, one pump only for set-up functions and feed, normally in a regular excavator there are usually two pumps that are interconnected and you get operational disturbances when the oil is not enough to drive several functions at the same time
Extremely low fuel consumption due to the efficiently designed hydraulic system
SPD telematic, GSM for logging all important machine data, warnings, error codes, troubleshooting, drill data, piling data, fuel consumption, hydraulics log, diagrams online, saved max for two years
The machine is always remotely controlled with CAN bus technology, therefore the cab is not needed, i.e. there are no unnecessary functions, remote control from HBC / SPD
The remote control has a color display for displaying all machine data, drill or piling data
Where the cabin would normally sit, we instead have a heating cabinet for water pumps and water pipes that must not freeze
S25 available with or without extendable undercarriage
The S25 has a powerful Cummins 6.7 liter diesel engine of 209 kW
All machine doors open upwards and form a roof when serviced
All tanks, diesel, adblue, tank pump, central lubrication, electrical cabinets, etc. are easily located on the same side of the machine
2 year warranty on our S25

 

Model
Mast attachment D7 (PM85)
Cradle stroke 7.000 mm
Mast total length 9.800 mm
Mast total weight without tool 4.800 kg
Crowd force 80 kN
Mast displacement 1.000 mm
Side inclination 15 degrees
Tool choice
Rotary head/top hammer RH16X / RH24X Eurodrill
Piling hammer SPD1000 / SPD2000 SPD
Cat head
Winch H60P Sepson
Max lifting force 20 kN
180° slewing left/right Option
Clamping table
Opening diameter 350 mm
Break out force 100 kNm
Hydraulics
Oil request from excavator auxilliary line X1 < 170 liter@280 bar
Valve manifold PVG32/128 Danfoss
Hydraulic plumbing 0 Gates
Max tank return back pressure < 5 bar
Max drain oil back pressure 0,5-2 bar
Remote control mast attachment
Software SPD (Can bus) Basic
Transmitter HBC Display
Remote control excavator N/A only complete rig
Trouble shoot online GSM
Recommended excavator
Mast mounted in the dipper arm 30-46 ton
Mast mounted in the boom 20-30 ton
Min motor power 80 kW
All technical data can be changed without prior notice.

 

Detail Specification
Base machine carrier SPD  S25
Engine Cummins B6.7-C260
Engine power (kW) 209 kW @ 2200 rpm
Emission standard Stage 5
Fuel tank 500 Lit
Weight (kg) 29.700
Counter weight 6.6 ton
Undercarriage standard R35/240 track size B60
Width in transport (mm) 3.000 mm
Height in transport (mm) 3.210 mm
Length in transport (mm) 15.500 mm
Track shoes 600 mm
Undercarriage option T27 Telescopic undercarriage option
Width (mm) 3000 mm – 4000 mm
Track shoes 800 mm
Boom type 2 piece boom HD
Boom length 2.6 m
Stick length 3.4 m
Pump max capacity (lit/min) All pumps are divided
Rexroth A11 P1 320 lit/min
Rexroth A11 P2 210 Lit/min
Rexroth A10 P3 132 Lit/min
19 m3 gear pump Optional equipment 30 Lit
Hydraulic tank 460 Lit
Hydraulic oil Panolin HLP Synth 46
Hydraulic micro filter Hydro-clean fine filter
Travel speed 2,2 km/h
Slewing turret brake Double breaks
Controls Totally remote controlled
Remote control SPD/HBC Can bus
Safety valves All cylinders
Painting upper housing, boom RAL1033 Dahlia yellow
Painting under carriage RAL7022 umbra grey
Warranty 24 months or 2000 hrs
Manuals Swedish, English, German