AN150
Made in Sweden
- Excellent quality-design from Interoc and refined in Sweden
- High technology but in a traditional design
- Flexible by the machine being modular
- Danfoss hydraulics controlled with Can bus
- Can bus control means faster and more efficient reaction between controls and hydraulics
- Fully remote controlled, HBC remote control, Danfoss Plus1 Micro controller, with SPD’s software
- Colour display showing X & Y, feed pressure, length measurement, hydraulic pressure, air pressure, service intervals and much more
- Since the machine is remotely controlled, the operator can take the safest place with regard to work moments
- GSM for online monitoring, troubleshooting
- Cummins quality engine QSB 6.7
- High oil flow maximized for well-balanced hydraulic temperature
- Environmentally more efficient than most rigs on the market
- Low diesel consumption
- Fewer hydraulic hoses, equal to less environmental impact and less risk of oil leakage, lower maintenance costs
- Fewer power cables, provide easier troubleshooting, but also less risk of problems
| Drive engine | Cummins QS B 6.7,CM2350 B136C, |
| Environmental standards | EU Stage V (5) |
| Engine output | 209 kW @ 2200 rpm |
| Diesel tank capacity | 300 lit |
| Hydraulic pump output | P1 230 lit/min @ 320 bar P2 230 lit/min @ 320 bar P 3 120 lit/min @ 320 bar |
| Hydraulic tank capacity | 600 lit |
| Hydraulic fluids | Mineral oil or biodegradable oil |
| Length (transport) | 7915 mm |
| Width | 2350 mm |
| Height (transport) | 3035 mm |
| Weight without drill head and magazine | 18000 kg |
| Specific ground pressure | 74 kN/m2 |
| Ground clearance | 350 mm |
| Pendelum range of crawlers | + 15° / – 15° |
| Travelling speed | 2,5 km/h |
| Traction force | 135 kN |
| Mast length | 7900 mm (7600 mm without winch) |
| Usable cradle stroke (single head) | 5600 mm |
| Usable cradle stroke (double head) | 4370 mm |
| Max. permissible rotation torque for working with rotary head |
20 kNm |
| Feed force | 115 kN |
| Retraction force | 115 kN |
| Feed speed | 0-25 m/min |
| Retraction speed | 0-25 m/min |
| Rapid feed speed | 0-60 m/min |
| Rapid retraction speed | 0-60 m/min |
| Clamping and breaking device | Double Ø250 mm, 50 kNm |
| Control | HBC/SPD Can bus remote control standard |
| Hydraulic drifters (available at option) | Eurodrill RH10X, RH16X, RH24X, RH32X, DH10, DH16, DH24 |
| Rotary heads (available at option) | Eurodrill RH10X, RH16X, RH24X, RH32X, DH10, DH16, DH24 |
| Additional equipment | KBM 130 Arc magazine (7xØ88,9 mm + 7x Ø133mm), KBM 150 (7XØ88,9mm + 7×152,4mm), Palfinger crane with manipulator, slewing 20 kN winch, optional double Ø350 mm clamping table, 100 kNm |
